Combination – Crossed Above VWAP (Volume)

Table of Contents

What is the Combination – Crossed Above VWAP (Volume) Scanner?

The Combination – Crossed Above VWAP (Volume) scanner will compare the current price to the real-time current VWAP for the day session. It’s also possible to compare the current price to the last 05/10/30/60-day VWAP. The results from this scan will return symbols where price has crossed above VWAP with volume, either for the current day session, or based on the setting for the last 05/10/30/60-days and has moved a positive number of percentages higher.

  • Scanner Category: Combination
  • Scanner Type: Customizable, which means the threshold values of the filters can be changed.
  • The scanner working time is from 04:00:00 to 20:00:00.

Trigger Conditions for Real-Time VWAP

The Combination – Crossed Above VWAP (Volume) Scan will be triggered if all the following conditions are true:

  • The current price is higher than the real-time VWAP (today’s VWAP).
  • The last price is lower than the real-time VWAP (today’s VWAP).
  • (volume/’10-day average volume’ *100%) is greater than the set percentage.
  • All of the common filters are true.

Trigger Conditions for last 05/06/30/60-day VWAP

The Combination – Crossed Above VWAP (Volume) Scan will be triggered if all the following conditions are true:

  • The current price is higher than the historical VWAP.
  • The last price is lower than the historical VWAP
  • (volume/’10-day average volume’ *100%) is greater than the set percentage.
  • All of the common filters are true.

Create a new Subscription for the Combination – Crossed Above VWAP (Volume) Scanner

In the Create Trade Signal window, choose ‘Combination – Crossed Above VWAP (Volume)’ and click the OK button. A new subscription will be created.

After adding the Combination – Crossed Above VWAP (Volume) scanner, it will appear in the main Trade Signal List window. Double click on the name of the scan in the Trade Signal List window and the Trade Signal Results screen will be visible. By default, the Combination – Crossed Above VWAP (Volume) scan is already pre-configured and results should be visible in this window after opening it.

Update the Filters of the Combination – Crossed Above VWAP (Volume) Scanner

There are several Optional Filters that can be adjusted for each Trade Signal scan. Please review these Optional Filters here: https://dastrader.com/docs/optional-filters/. The settings mentioned below fall under the Mandatory Filters section in the TradeSignal Config window.

VWAP-Type

This setting defines the use of either the real-time VWAP or the historical VWAP.

Values:

  • Today-VWAP
    Real-Time (current session) VWAP
  • 05 day average VWAP
    Historical VWAP
  • 10 day average VWAP
    Historical VWAP
  • 30 day average VWAP
    Historical VWAP
  • 60 day average VWAP
    Historical VWAP

VWAP Min Time Interval

This setting defines the VWAP Minimum Time Interval to filter our duplicate message. The time is measured in minutes. This is helpful when price and VWAP are criss-crossing each other when the symbol is trading sideways and to avoid constant alerts from TradeSignal during this sideways movement.

Value: 30-480
For example: 30 means duplicate messages would be filtered out during every 30 minute period. Only 1 message would be visible during the 30 minute period.

VWAP-Min Average Volume (10Day)

This setting defines the minimum number of 10-day average daily volume to filter.

Value Range: 150000 – 9999999999
For example: 200000 means the 10-day average daily volume used in this scan must be between 200000 and 9999999999

VWAP-Min Volume %(10Day)

This setting defines the minimum percentage of the current volume compared to the 10-day average daily volume to filter.

Value Range: 3 – 9999
Formula: Volume/’10-day average volume’*100%
For example: 4 means (Volume/’10-day average volume’*100% will return results where the volume is between 4% and 9999%.

Example of the Combination – Crossed Above VWAP (Volume) Scanner

Open TradeSignal from the Tools > TradeSignal menu. When the TradeSignal List window opens, click the New button. In the window that opens, select Combination – Crossed Above VWAP (Volume) under the Combination scanner options. Click the Advanced Settings button and set the following options:

  • Exchange: N;A;Q;U;u (this is already configured by default)
  • Price-Price Range (Dollars): Min: 5, Max: 100
  • Vol-Today Volume (whole-day): Min 2000, Max: 9999999999
  • VWAP-Type: Today VWAP
  • VWAP-Min Time Interval: 30
  • VWAP-Min Average Volume (10Day): 150000
  • VWAP-Min Volume %(10Day): 6

Click OK and the TradeSignal scan will be saved. Double click on the name of the scan in the TradeSignal List window to view the results.

The above scan result shows SOFI crossed the VWAP with volume more than 150000.

The chart above shows where the signal was generated (white circles added to show price crossed VWAP on high volume.).

Powered by BetterDocs